previous arrow
next arrow
Slider

Trade & Finance

We provide International Trade & Finance solutions to ease Import & Export activity (buy & sell commodities, or any other goods), general trading, developments funding, solutions to be able to access a tender, etc.

We manage for you the most used financial tools and instruments on the International Trade & Finance activity, such Standby Letter of Credit, Letter of Credit, Bank Guarantee and Performance Bond.

Letter of Credit (LC) A Letter of Credit (LC), also known as a Documentary Letter of Credit (DLC) is a payment mechanism, delivered via Swift MT700, and it is used in international trade to provide an economic guarantee from a creditworthy bank to an exporter of goods. Letters of credit are used extensively in the financing of international trade, where the reliability of contracting parties cannot be readily and easily determined. Its economic effect is to introduce a bank as an underwriter, where it assumes the counterparty risk of the buyer paying the seller for goods.

Standby Letter of Credit (SBLC) A SBLC is a legal document that guarantees a bank's commitment of payment to a seller in the event that the buyer–or the bank's client–defaults on the agreement. A Standby Letter of Credit helps facilitate international trade between companies that don't know each other and have different laws and regulations. Although the buyer is certain to receive the goods and the seller certain to receive payment, a SBLC doesn't guarantee the buyer will be happy with the goods. This is a security against an obligation which is not performed, that shows the buyer´s strength and it is delivered via Swift MT760.

Bank Guarantee (BG) A bank guarantee is a promise from a bank or another lending institution ensuring that if a particular borrower defaults on a loan, the bank will cover the loss. A bank guarantee is delivered via Swift MT760, and it allows the customer, or debtor, to acquire goods, purchase goods, equipment or draw down a loan.

Performance Bond (PB) A performance bond, also known as a contract bond, is a surety bond issued by an insurance company or a bank to guarantee satisfactory completion of a project by a contractor. The term is also used to denote a collateral deposit of good faith money, intended to secure a futures contract, commonly known as margin. Performance bonds are usually issued for 10% to 20% of the contract amount but may be fixed by the local law of the importer's (contractor´s) country. Obligations under a performance bond could concern supply obligations or obligations concerning function and quality during the agreed period of the guarantee. It is delivered via Swift MT760

Advance Payment Guarantee (APG) An advance payment bond ensures repayment to the importer of an agreed percentage of the contract amount (typically 10%-30% of the contract amount) if the exporter does not fulfil its contractual obligations. It is delivered via Swift MT760

Bid Bond (BB) A bid bond (also called a tender bond) is issued to ensure that the exporter submits realistic bids under the tender process and to protect the importer for any loss that might occur if the exporter fails to sign the contract. A bid bond also assures the importer that the exporter will comply with the terms of the contract in the event that the tender is accepted. Bid bonds are usually issued for 2% to 5% of the tender amount. It is delivered via Swift MT760. A bid bond is often a condition for the consideration of a bid.

Bank Comfort Letter (BCL) A bank confirmation letter (BCL) is a letter from a bank or financial institution confirming the existence of a loan or a line of credit that has been extended to a borrower, (typically to prove buyer´s capability to purchase certain goods before getting a Proof of Product - POP) The letter officially vouches for the fact that the borrower—typically an individual, company, or organization—is eligible to borrow (or owns) a specified amount of funds for a specified purpose. It is delivered via Swift MT799

Incoterms Guide

‘Incoterms’ has become a stock term in the international freight world. In fact, it is a word that is copyrighted by the International Chamber of Commerce (ICC). Following some years of discussion and drafting within the ICC, they issued the first International Commercial Terms (Inco terms) in 1936. There have been 5 revisions since then, up to the latest – Incoterms 2020.

What is meant by Incoterms is a set of rules governing the distinct types of transportation around the World. It codifies what is meant by each of the (currently) 11 identified and generally accepted types of freight transaction that can be used between sender and recipient. It helps them to understand who owns the goods at each stage, who is responsible in each case for the actual task of shipping, who pays for the various cost elements, and who bears the associated risks (i.e. who pays in the event of damage or loss, at a given point).

The United Nations Commission on International Trade Law (UNICTRAL) recognises these terms as being the global standard for transportation; and they are available in 31 languages through ICC.

What is the ICC?

Based in Paris, ICC was founded in 1919. In the chaos that followed WW1, a group of industrialists and financiers were determined to try to bring some order into world trade and to establish some rules and agreements that would make it easier to do business across borders and foster open trading. Its member companies now come from over 120 countries.

ICC's greatest achievements include a bank letter of credit code of practice, an advertising practice standard, and of course, Incoterms. The Incoterms rules regulate the following:

  • At what time and place the transfer of risks over the goods takes place, from the seller to the buyer.
  • The place of delivery of the merchandise.
  • Who hires and pays the transportation and insurance costs.
  • What documentation each of the parties must process.

Incoterms 2020

The INCOTERMS rules are updates made by the International Chamber of Commerce. In this latest 2020 update, the modifications are minimal. There is a change of name from DAT (Delivered At Terminal) to DPU (Delivered at Place Unloaded), due to the little use that companies have made of it and the restrictive vision that the concept "Terminal" supposed despite that it was indicated in the 2010 version that it did not refer only to maritime terminals.

DPU is designed for those companies that oversee selling for projects or very delicate goods that require controlling the entire logistics chain from loading at origin to unloading and commissioning at destination (except for customs procedures and payment of taxes. at destination)

But, in addition to the change from DAT to DPU, there have been small changes in CIP / CIF and FCA. In CIP / CIF there are modifications in the insurance coverage: until now it was required to contract a policy with, at least, ICC “C” coverage in both cases. With the start-up of INCOTERMS 2020, if we agree to ship under CIP conditions, the coverage must be ICC “A” (the so-called “all maritime risk”) while if the shipment is made under CIF conditions, the obligation to contract at least ICC “C” coverage (lower than class “A”)

Regarding the FCA, in the 2020 version the option is established, in the case of maritime transport, so that the buyer can instruct the carrier (shipping company or its agent) who has contracted to issue a Bill of Lading ( B / L - Bill of Lading) with the notation “on board”, which indicates that the merchandise has been loaded on board the ship. This is the most common transport document used in the operation of letters of credit to justify the delivery of the merchandise and, with it, make the payment to the seller effective.

The rest of the changes are less important, more "formal" and are related to the presentation of the information, the list of expenses, the obligation of the seller or buyer, when indicated by the INCOTERMS term to contract the transport (which is indicated until now) or provide it by their own means (the novelty in INCOTERMS 2020 if you have your own fleet that does not require contracting with third parties), the inclusion of requirements derived from transport security in a generic way (for example VGM) or the inclusion of explanatory notes that, until now, did not exist.

As we shall see, the Incoterms are described by 3-letter acronyms that aim to make them well-known and understood anywhere, regardless of language.
This latest edition contains 11 terms. The first 7 are applied to any form of transportation: the final 4 are applicable only to sea or waterway freight.

It is important to understand the concept of ‘delivery’ as it is understood in the freight industry. It does not always mean the physical arrival of the goods at their destination. It means the point at which the seller completes his contractual obligation (so in the case of Ex Works, that is when the buyer loads a lorry with the goods at the seller’s plant)

It may also help to note the significance of the first letter in the terms:

C terms require the seller to pay for shipping.

D terms mean that the seller or shipper’s responsibility ceases at a specified point, and they deal with who will pay pier, docking and clearance charges.

E terms mean that when the goods are ready to leave the seller’s premises, his responsibility ceases.

F terms mean that the primary cost of shipping is not met by the seller.

Section A – Any mode of transport

1. EXW Incoterms – Ex Works (named place of delivery): This simple arrangement places the onus on the buyer to carry out the whole shipping process. The seller just makes the goods available at his factory or warehouse at the agreed date: if he physically loads them it is at the other party’s risk, unless specific wording is added to the contract to vary this term.
The buyer is responsible for loading, transportation, clearance and unloading.
‘Ex Works’ is also the typical basis of making initial quotations when the actual shipping costs at a given time are not known.
The buyer pays all transportation costs and also bears the risks for bringing the goods to their final destination.

2. FCA Incoterms – Free Carrier (named place of delivery): The seller hands over the goods, cleared for export, to the first carrier with whom he has made the arrangements (even if that carrier has been chosen by the buyer). The buyer normally pays for carriage to the port of import, and risk passes to him when the goods are handed over to the first carrier, even though ‘delivery’ may not take place until the destination. The buyer also pays for insurance.

3. CPT Incoterms – Carriage Paid To (named place of destination): The seller pays for carriage. The risk passes to the buyer when the goods are handed to the first carrier at the place of Importation. The seller also has to pay for cargo insurance, in the name of the buyer, when goods are in transit.

4. CIP Incoterms – Carriage and Insurance Paid to (named place of destination): This is commonly used in road/rail or road/sea container shipments and is the multimodal equivalent of CIF. The seller pays for carriage and insurance to the named destination point, but risk passes when the goods are handed over to the freight forwarder, who in practice supplies the insurance element.

5. DPU Incoterms – Delivered Place Unloaded (named terminal at port or place of destination): In this system (new in Incoterms 2010) the seller pays for carriage to the arrival terminal, (excluding import clearance). Up to the point that goods are unloaded at the terminal, the risk remains with the seller.

6. DAP Incoterms – Delivered at Place (named place of destination): Also new in Incoterms 2010, this is identical to DAT, except that the seller remains responsible for cost and risk (exc. import clearance) right up to the point that the goods are ready for unloading by buyer at his chosen destination.

7. DDP Incoterms – Delivered Duty Paid (named place of destination): This is the polar opposite to EXW: here the seller assumes all costs, risks and obligations, including import duties, taxes, clearance fees etc., right up to the destination point, where the buyer is then responsible for unloading the shipment.
(You may also come across the unofficial phrase “Free In Store” – FIS – for this term)

Section B – Sea and inland waterway transport only

8. FAS Incoterms – Free Alongside Ship (named port of shipment): This is revised in Incoterms 2010, where now the seller or, more typically, his shipper/freight forwarder, must clear the goods for export.
Note that this is not a multimodal term, but is used for heavy and bulk cargoes.
The seller’s forwarder puts the goods alongside the ship. It that point delivery is made and thereafter the buyer’s forwarder is responsible for transport and insurance, at the buyer’s risk and cost.

9. FOB Incoterms – Free on Board (named port of shipment): Be wary of the misleading nature of this common phrase and how it is often misused. It is to be used only for exclusively water transportation. Do not use it for road/rail/sea multimodal container transportation – use FCA instead.
In FOB, the seller clears the goods for export and loads the goods on the vessel and at the port that have been nominated by the buyer.
New for Incoterms 2010 is that cost and risk are divided when the goods are actually on board: but delivery occurs when the goods are on board ship.

10. CFR Incoterms – Cost and Freight (named port of destination): Under this arrangement (previously known as C&F) the seller must pay the costs and freight to get the goods to their destination port, at which point delivery is achieved (but it is not the seller’s job to clear them through customs).
Actual risk passes to the buyer once the goods are loaded on the ship. Note that insurance for the goods is the responsibility of the buyer.

11. CIF Incoterms – Cost, Insurance and Freight (named port of destination): CIF is a quite common format and it is identical to CFR: the only difference is that the seller also pays to insure the merchandise.

Incoterms_all-modes

 

Old Incoterms 2000 types that are not in Incoterms 2010, nor 2020

As mentioned earlier, the parties may choose to use older terms, and the following that are no longer specified by the ICC may still be encountered.

DAF – Delivered at Frontier (named place of delivery)
For rail and road shipments. Seller pays for transport to the country frontier. Buyer arranges for customs clearance and pays for transport from frontier to his site. Risk passes at the frontier.

DES – Delivered Ex Ship (named port of delivery)
You may come across this with bulk commodities where seller owns or charters their own vessel. Unlike CFR and CIF, seller bears not just cost, but risk and title until arrival of the vessel at the delivery port. Buyer pays to unload plus customs duties, taxes, etc.

DEQ – Delivered Ex Quay (named port of delivery)
The same as DES, except risk passes only when goods are unloaded at the destination.

DDU – Delivered Duty Unpaid (named place of destination)
Seller delivers the goods to the ultimate destination in the contract. The goods are not cleared for import or unloaded. The buyer is responsible for all costs and risks beyond this point. Any variation must be explicit in the contract.

 

What is the legal status of Incoterms?

It is important to note the limitations of Incoterms. They do not replace the many and varied legal systems that apply in the world’s countries and trading blocs: and it is these often infuriating legal minefields that freight forwarders encounter daily and in so doing, fully justify their fees.

Incoterms are designed to codify basic concepts of risk, the allocation of costs, the point at which delivery takes place, and the responsibility for insurance. This has been hugely beneficial to world trade: it allows insurers to operate effectively at a global level and for all the countries which adhere to the Incoterms rules (that is, most of them) it oils the wheels (and keels) of trade.

What International Commercial Terms do not cover are the issues like who covers the goods before and after the delivery process; who pays VAT or other sales taxes; the precise nature of the contract between buyer and seller (although ICC does have model contracts and clauses, these are not legally binding); or when things go wrong, how alleged breaches of contract are settled. The sales contract will state which country’s legal system will apply in that event.

International legal harmonisation on trade law issues is something that UNICTRAL has been working on for many years, with some success, but much remains to be done.

Other moves that will help international trade have come from the Rotterdam Rules, endorsed by 22 countries accounting for 25% of world trade – they allow for multi-modal door-to-door shipments to have built-in liabilities and insurance issues contained within individual contracts. Another potential step forward towards contractual uniformity comes from the 59 countries (including France, China and the United States but not yet the UK) that are signatories to the U.N. Convention on Contract for the International Sale of Goods (“CISG”)